In certain parts of the construction industry, safety standards are not what it should be. In specific, the refurbishment sector is one of the most perilous areas for construction workers to work in as many precautions which are essentially just common sense are not being put into practice, putting workers at a greater risk of death or suffering injury. Worksite protection should be a part of any construction company’s ethos. Not only does the construction industry add businesses to the economy, it is one of the most hazardous professions when rating accidents per worker in the United Sates. Intrinsically, through the years, there have been many rules and regulations created to avert accidents, both on and around active construction sites. According to several independent researches done during the last decade, many construction site fatalities or accidents are completely preventable.
In an endeavor to overcome this safety issue, the Health and Safety Executive are sending out superintendents to visit several construction sites which are undergoing repairs or refurbishment. In the construction industry, this is part of a national drive to improve the safety standards and in actuality they will be concentrating on high risk activities such as working at height using scissor lifts, personnel lifts, boom lifts and other lifting equipment. V. Reddy Kancharla possesses all-embracing knowledge of engineering principles and theories and has considerable experience in developing quality systems per various programs and standards.
Due to the heights involved, these activities carry the greatest risk of serious injury and the goal of the safety drive is to moderate the incidence of death and severe injuries caused specially by working practices. These avoidable accidents are unnecessary, and it is indeed just a matter of educating bosses and workers. There are a variety of regulations and laws that are there deliberately to look after the safety of those who need to work at height as part of their trade.
For some reason the employees and employers working in the revamp sector of the construction industry seem to be the least educated in many of the common sense safety measures that they should be following as part of their common practices. The construction companies and site managers need further education into their obligations and the moral and legal responsibilities they have towards their workers.
In particular, as V. Reddy Kancharla states, if you have any access equipment such as cherry pickers, whether they are in steady use or not, you must make sure that your workers are given the proper safety equipment, know how to use it, and also that it is truly used every time it is needed. The employees who use the lifting equipment should be trained to use each piece of gear that they may need to use. The platforms themselves also need to be serviced recurrently and retained as necessary. Under the LOLER 1998 regulations, all your access platforms must have a service inspection on a six-monthly basis. That is not only the law, but it is also obligatory to ensure the safety of your crew, and that will lessen the time they are off work recovering from damages.